A printable google doc is available here
Body:
·
The
following are maximum measurements for the car:
o
Weight:
5.0 ounces
o
Overall
length: 7 inches
o
Overall
width: 2.75 inches
o
Between
wheel clearance: 1.75 inches
o
Underbody
clearance: .375 inches or 3/8 inch
·
Official
race scale and measurement devices are considered final.
·
The
body may be shaped as desired, but no part of the car may protrude past the
starting peg.
·
All
material must be securely fastened to the car.
·
Kit
wood provided must be used. We do not require
BSA approved kits.
Wheels:
·
The
wheels may not be drilled, cut, beveled or rounded.
·
Use
wheel bearings, washers or bushings provided.
·
Three
wheels must touch the track at any time.
·
The
tread of three wheels must ride flat and not at an angle (no angling or canting
of the wheels)
·
Two
rear wheels and two front wheels must be
positioned directly across the body from each other –(i.e. staggered wheel
bases are not allowed).
Axles:
·
No
oils or wet lubricants
·
The
car must not ride on springs
·
The
car must be freewheeling and have no starting device.
Each car will
need to pass inspection before it may compete.